Dimplex Portable Air Conditioner Error Codes


Error codes are shown on the display should a fault occur

E1: Indicates open circuit or short circuit in the room temperature sensor.

E2: Indicates open circuit or short circuit in the pipe temperature sensor.

E4: Indicates the internal water container is full. Refer to WATER DRAIN.

If error code E4 persists, please contact an authorized service centre.

TROUBLE SHOOTING

Problem: The air conditioner does not operate.

Cause: No power supply. /Error code E4 is shown, indicating the internal water container is full. /The start timer function is active.

Solution:Connect to a functioning power supply socket and switch on/Empty the internal water container.




(Refer to WATER DRAIN) /Press the POWER button to deactivate the TIMER function

Dimplex Portable Air Conditioner TROUBLE SHOOTING

Dimplex Portable Air Conditioner TROUBLE SHOOTING

Dimplex Portable Air Conditioner Manual PDF

 








One Response to Dimplex Portable Air Conditioner Error Codes

  1. Andrew Dods says:

    Hi. My 10rc dimplex portable ac stops blowing cold air. While it is doing this it still exhausts hot air from rear, flashes 03, then returns to normal only the “ice symbol” flashes or changes to a flashing square with rain like symbol flashing. Any clues ? Thanks. Andrew.

Leave a Reply

Your email address will not be published. Required fields are marked *