Scandic and Tropic Series When below list for identification of error code occurs, please turn off air conditioner and disconnect power, and then contact the qualified professionals for service. Troubleshooting Before calling for service, review this list. It may save your time and expense. This list includes common occurrences that are not the result of
If the display shows any of the following error codes, unplug the unit for at least 5 minutes and plug it back in. E1: Room Sensor failure E2: Defroster Sensor failure E3: Humidity Sensor failure EC: Unit malfunction, Make sure the temperature of the working environment is between 41°F/5°C and 95°F/35°C. If not, please operate
Please check the unit and suggestions below before asking for professional service, but never dismantle or repair the unit by yourself, it may cause harm to you and your property LED displays error code “E1” Tube temperature sensor failure – Check the tube temperature sensor and related circuits LED displays error code “E2” Room temperature
Filomuro DC Inverter SLW; In the event of a malfunction, the display shows an alarm code. The device will nonetheless continue to perform certain functions (see OPERATION column). Alarm displayed: E1 Cause: Room temperature probe (RT) failure. Operation: It is possible to normally activate the Cooling, Dehumidification and Heating modes. Alarm displayed: E2 Cause: Internal
Error Messages are displayed, respectively by first the Er icon and then the special code (01, 02, …, 20, etc.) of the failure. In that case, do nothing to the air conditioner and contact with the Authorised Service. Er11 and Er13 are not error messages. If you see these messages, apply the steps under the
Trouble Shooting Please contact professional serviceman without delay in following situation Trouble: Machine cannot work Cause: Power off water-full indicator turns on Solution: Power on Drain water out Trouble: Machine auto-restarts frequently Cause: Direct sunlight Door and windows are open , many heat sources in the room Filters are too dirty Air-inlet or air out-let
Indoor Unit Error Display: Error Code: E0 LED Status: EEPROM parameter error Error Code: E1 LED Status: Indoor / outdoor units communication protection Error Code: E2 LED Status: Zero-crossing signal error Error Code: E3 LED Status: Indoor fan speed out of control Error Code: E5 LED Status: Open or short circuit of outdoor temperature sensor
Emerson EMERSON QUIET KOOL Portable AC Error Codes; Fault Code: AS If the screen on the unit displays ”AS”, the room temperature sensor has failed. Contact your Authorize EMERSON QUIET KOOL Service Center. Fault Code: ES If the screen on the unit displays ”ES”, the pipe temperature sensor has failed. Contact your Authorize EMERSON QUIET
Problem: Unit does not turn on when pressing ON/OFF button Possible Cause: P1 Error Code Problem: Unit does not turn on when pressing ON/OFF button. Troubleshooting: The Water Collection Tray is full Turn off and unplug the unit, drain the water from the Water Collection Tray and restart the unit Possible Cause: In COOL mode, Room temperature
Della Portable Air Conditioner Error Codes, Troubleshooting and Manuals; Error Code: CH01 Possible Causes: Room temperature sensor failure Corrective Action: Check the room temperature sensor and related circuits Error Code: CH02 Possible Causes: Tube temperature sensor failure Corrective Action: Check the tube temperature sensor and related circuits Error Code: E1 Possible Causes: Tube temperature sensor
