IFB Industries was founded in 1974, in Goa India. The company currently owns 530 retail stores and is a trusted brand in the market. What once was the Indian Fine Blanks Ltd., soon became the IFB industry. Back in the day, the company started its system by collaborating with Heinrich Schmid AG, and not so soon after tying an agreement with Bosch-Siemens Hausgerate. It was then that the company started producing domestic appliances such as washing machines, air conditioning, etc.
Today IFB offers buyers a wide range of home and commercial appliances that includes but is not limited to dishwashers, washer-dryers, automatic washing machines, laundry dryers, microwaves, ovens, chimneys, hobs, air conditioners and so much more. All of which are proudly manufactured and distributed in India.
Error codes are a common issue you may face with various appliances in your house or workplace. Rather than panicking, we suggest you grab a pen and paper and note down the code rather than pressing various buttons. This can commonly result in prolonging the issue or even causing more issues in the long run. So why risk damaging your appliance any further, when you will be able to find out the exact issue using the common error code list for IFB AC error codes listed below. Once you know the exact issue you can easily call in a professional, or fix the issue yourself.
Codes List
In case of error, the display on the indoor unit shown the following error codes.
| Error Codes | Description of the trouble |
|---|---|
| E1 | The fault of indoor temperature sensor. RUN lamp: flashes once. |
| E2 | The fault of indoor pipe temperature sensor. RUN lamp: flashes twice. |
| E4 | Gas Leakage |
| E6 | Malfunction of indoor fan motor. RUN lamp: flashes 6 times. |
Indoor Unit Display
Troubleshooting
Malfunction: The appliance does not operate
Possible Causes:
- Power failure/plug pulled out
- Damaged indoor/outdoor unit fan motor
- Faulty compressor thermomagnetic circuit breaker
- Faulty protective device or fuses.
- Loose connections or plug pulled out
- It sometimes stops operating to protect the appliance.
- Voltage higher or lower than the voltage range
- Active TIMER-ON function
- Damaged electronic control board
Malfunction: Strange odour
Possible Causes: Dirty air filter
Malfunction: Noise of running water
Possible Causes: Back flow of liquid in the refrigerant circulation
Malfunction: A fine mist comes from the air outlet
Possible Causes: This occurs when the air in the room becomes very cold, for example in the COOLING or DEHUMIDIFYING/DRY modes
Malfunction: A strange noise can be heard
Possible Causes: This noise is made by the expansion or contraction of the front panel due to variations in temperature and does not indicate a problem
Malfunction: Insufficient airflow, either hot or cold
Possible Causes:
- Unsuitable temperature setting.
- Obstructed air conditioner intakes and outlets.
- Dirty air filter.
- Fan speed set at minimum.
- Other sources of heat in the room.
- No refrigerant
Malfunction: The appliance does not respond to commands
Possible Causes:
- Remote control is not near enough to indoor unit
- The batteries of remote control nearly has no power
- Obstacles between remote control and signal receiver in indoor unit
Malfunction: The display is off
Possible Causes:
- Active LIGHT function
- Power failure
Malfunction: Switch off the air conditioner immediately and cut off the power supply in the event of:
Possible Causes:
- Strange noises during operation.
- Faulty electronic control board
- Faulty fuses or switches.
- Spraying water or objects inside the appliance.
- Overheated cables or plugs.
- Very strong smells coming from the appliance
Description: Air conditioner can’t configurate successful
Analysis of cause:
- Check the mobile or computer connected WIFI address and password is correct;
- Check air conditioner under configuration status;
- Whether have any firewall been set or not , router work normally or not;
- Air conditioner, router and mobile work in singal scope or not;
Description: Mobile can’t find air conditioner
Analysis of cause:
Software display,
Air conditioner out of line. Please check network working
- The air conditioner has been reconfigurated;
- Air conditioner out of power;
- Router out of power;
- The air conditioner cannot connect to the router;
- The air conditioner cannot connect to network through the router (under the remote mode);
- Mobile can’t connect to router (Under local control mode);
- The mobile phone cannot connect to network (under the remote mode).
Description: Mobile lost air conditioner controlling authority
Analysis of cause: Software display : Identification failed, please connect the local network and refresh again. It means the air conditioner has been reset, and the mobile phone has lost the permission of controlling the air conditioner, so you need to connect to WiFi to get permission. If it still cannot be controlled after connecting to local network, please delete it and wait for its refresh again
Description: Network uninitialized
Analysis of cause: It usually happened if user enter software and click air conditioner immediately, please observe the network working conditon, waiting a few seconds and try again
Description: The air conditioner can’t be deleted in the list
Analysis of cause: The air conditioner can’t be deleted under locked state, please unlock it and try again
Maintenance
Periodic maintenance is essential for keeping your air conditioner efficient. Before carrying out any maintenance , disconnect the power supply by putting the installation on/ off switch to off.
Indoor Unit:
Antidust Filters
- Open the front panel following the direction of the arrow
- Keeping the front panel raised with one hand, take out the air filter with the other hand
- Clean the filter with water ; if the filter is soiled with oil,it can be washed with warm water (not exceeding 45C ). Leave to dry in a cool and dry place
- Keeping the front panel raised with one hand , insert the air filter with the other hand
- Close
The electrostatic and the deodorant filter (if installed) cannot be washed or regenerated and must be replaced with new filters once every 6 months.
Remote Control
Manual Pdf
IFB Air Conditioner User Manual
- Aux AC Error Codes – How To Fix Them - November 15, 2024
- LG VRF Error Codes List – Multi V - November 15, 2024
- Black and Decker AC Error Codes List and Fixes - November 1, 2024
*If you can't find the code you're looking for on our site, please let us know, and we'll update our database as soon as possible.
What is 8.8 in IFB AC 1.5 ton.
I am getting FY error
IFB inverter AC e0 problem
how to solve this error?
Ifb p0 error 10 AC ranning after p0 error what problems
I hav new 2ton ifb inverter ac it shows E9 after two days brought what to do now it does not cooldown anymore.
Hi. I have been facing the same E9 problem since the last 2 years for this 2 ton inverter ac. They replaced the outdoor unit last year but again I am facing this issue this year