Daewoo AC Error Codes and Troubleshooting

Daewoo AC error codes are designed to help diagnose and resolve any issues that may arise with your unit. These codes are typically displayed on the control panel of your air conditioning unit, allowing you to quickly identify the problem and take the appropriate corrective action.

Most Common Codes

Here are some of the most common Daewoo AC error codes, along with their meanings and potential causes.

Troubleshooting

Before requesting service, please refer to the chart below for possible solutions:

Symptoms: No power

Possible Cause:

1. Power failure.
2. Line voltage too low.
3. Unit is unplugged or not completely plugged in.
4. Unit is off.
5. Batteries in remote are weak or dead.
6. EMERGENCY/REMOTE switch is not set to REMOTE.

Possible Solutions:

1. Restore the power.
2. Contact electrician to install new outlet.
3. Insert plug all the way.
4. Turn unit on.
5. Replace remote’s batteries.
6. Slide EMERGENCY/REMOTE to REMOTE.

Symptoms: The compressor does not turn on. (no cool air)

Possible Cause:

1. When the unit is first plugged in and turned on, the compressor will delay turn on for 3 minutes.
2. If the unit is turned off and then immediately back on, the compressor will delay for 3 minutes.
3. The air filter(s) is dirty or clogged.
4. Unit is located near a heat source (heater, stove, etc.)
5. A door or window is open.
6. There is an obstacle in front of intake or indoor unit.
7. Thermostat is set too high.

Possible Solutions:

1. Wait 3 minutes for the unit to operate.
2. Wait 3 minutes for the unit to operate.
3. Clean or replace filter(s).
4. When locating unit for the first time,make sure it is in a desirable location.
5. Shut door or window.
6. Remove obstacle.
7. Set thermostat lower.

Symptoms: Strange sounds occur

Possible Cause: During operation, especially after turning it on or off, refrigerant flows inside the unit.

Possible Solutions: This is normal.

Symptoms: Strange smells occur.

Possible Cause: The fan is bringing out the smells of the carpet, walls, etc.

Possible Solutions: The smell should go away shortly.

Symptoms: No remote operation.

Possible Cause:

1. Batteries are weak, dead or inserted improperly.
2. Remote is out of range.
3. Remote not aimed at sensor.
4. There is an obstruction between unit and remote.

Possible Solutions:

1. Replace batteries.
2. Move closer to unit.
3. Aim remote at sensor.
4. Remove obstruction.

Self-Diagnostic Function

Indoor fan does not operate at all (E6).

Product does not operate at all.

Remote Control

Manual Pdf

Aircon Service Manual PDF

• Author
• Recent Posts

Danny Reese

HVAC Expert at acerrorcode.com

Regarding error and fault codes, we believe sharing knowledge is the best way to help everyone. That is why we established ACErrorCode.com, to give you every bit of info you need as a customer. HVAC Expert Contact: dannyreese@acerrorcode.com Call: 916-954-2677

Latest posts by Danny Reese (see all)

• Aux AC Error Codes – How To Fix Them - November 15, 2024
• LG VRF Error Codes List – Multi V - November 15, 2024
• Black and Decker AC Error Codes List and Fixes - November 1, 2024

*If you can't find the code you're looking for on our site, please let us know, and we'll update our database as soon as possible.